Konfigurasi BGP (iBGP)

     * Konfigurasi iBGP pad R1-R2 karena memiliki AS yang sama yaitu 100
  Pada R1
  >router bgp 100
  >neighbor 2.2.2.2 remote-as
  > neighbor 2.2.2.2 update-source loopback0

  Pada R2
  >router bgp 100
  >neighbor 1.1.1.1 remote-as
  >neighbor 1.1.1.1 update-source loopback0

Konfigurasi BGP (OSPF)

* Konfigurasi ospf untuk advertise tiap router

    Pada router R1
    >router ospf 10
    >network 10.10.10.0 0.0.0.255 area 0
    >network 1.1.1.1 0.0.0.0 area 0
    >exit

    Pada router R2
    >router ospf 10
    >network 10.10.10.0 0.0.0.255 area 0
    >network 20.20.20.0 0.0.0.255 area 0
    >network 2.2.2.2 0.0.0.0 area 0
    >exit

    Pada router R3
    >router ospf 10
    >network 20.20.20.0 0.0.0.255 area 0
    >network 3.3.3.3 0.0.0.0 area 0
    >exit

Konfigurasi BGP (Loopback)

* Konfigurasi interface loopback pada tiap router

   Pada R1
   >int loopback0
   >ip add 1.1.1.1. 255.255.255.255
   >exit

   Pada R2
   >int loopback0
   >ip add 2.2.2.2. 255.255.255.255
   >exit
 
   Pada R3
   >int loopback0
   >ip add 3.3.3.3. 255.255.255.255
   >exit

Konfigurasi BGP (Interface Serial)

    Langkah awal:
* Susun 3 router, dengan menggunakan kabel serial




* Konfigurasi interface serial pada masing-masing router

    Pada R1
    >int s 1/0
    >ip add 10.10.10.1 255.255.255.0
    >clock rate 56000
    >no shutdown
    >exit

    Pada R2
    >int s 1/0
    >ip add 10.10.10.2 255.255.255.0
    >no shutdown
    >exit
    >int s 1/1
    >ip add 20.20.20.1 255.255.255.0
    >clock rate 56000
    >no shutdown
    >exit

    Pada R3
    >int s 1/0
    >ip add 20.20.20.2 255.255.255.0
    >no shutdown
    >exit

Dasar BGP

Konfigurasi BGP

Border Gateway Protocol disingkat BGP adalah inti dari protocol routing internet. Ketentuan dalam mengkonfigurasi BGP dalam AS(autonomous Systems) yang sama disebut iBGP, sedangkan menggunakan AS yang berbeda berlaku menggunakan eBGP. Mari kita mencoba mengkonfigurasi keduanya dalam memetakan paket data.


Daftar isi :

Konfigurasi BGP + MPLS ( MPLS )


  1. Barulah kita mengaktifkan MPLS,,monggo dilanjut
Perintah berikut digunakan untuk mengaktifkan MPLS di LERI.
>ip cef
>mpls label protocol ldp
>mpls ldp router-id Loopback0 force
>interface serial 1/0
>ip address 192.168.1.1 255.255.255.0
>mpls ip
>exit


Perintah berikut digunakan untuk mengaktifkan MPLS di LERE.
>ip cef
>mpls label protocol ldp
>mpls ldp router-id Loopback0 force
>interface serial 1/0
>ip address 192.168.2.2 255.255.255.0
>mpls ip
>exit


Aktifkan MPLS di LSR1
>ip cef
>int s1/0
>ip address 192.168.1.2 255.255.255.0
>mpls ip
>exit
>Int s1/1
>ip address 192.168.2.1 255.255.255.0
>mpls ip
>exit


Dan terakhir aktifkan MPLS di LSR2
>ip cef
>int s1/0
>ip address 192.168.2.2 255.255.255.0
>mpls ip
>exit
>Int s1/1
>ip address 192.168.3.1 255.255.255.0
>mpls ip
>exit


  1. Untuk mengecek  MPLS maka lakukan
>show mpls ldp neigh



  1. Untuk mengetahui hop packedata dari PE ke PE
>traceroute  <ip yang dituju>